HomeAbout UsInfrastructureProductsLogisticsFeedbackContact Us
 
Main Factory - Minarels Division
 
Machines
MINERALS DIVISION
Street Blues:

Street Blues - Minerals Division - To give the best quality Quartz & Feldspar Powder, in various Meshes at a much competitive rates with the best services, one middle aged Mr. Subramaniam in 1985 started Street Blues Minarels Division at Thevoor,, on the outskirts of Salem district, which is famous for Textile and Steels Industry in Tamilnadu, South India. Even though the Minerals Stones are plenty in the state, and the total requirements was coming from Rajasthan, which was around 2500 Kms away from Tamilandu, Street Blues had utilized its 85% of the production capacity in the First year and produced 3000 Tons and recorded a sales target of 75% of the production. In the second year the company attained a 100% production and sold 90% and out of which 10% was Exported through prominent export houses of Chennai.

 
Quartz Powder 'A' Grade:

This is very pure Quartz (Silica) powder manufactured by crushing pure and hand-picked lumps obtained from mines directly. It is pure white in appearance and free flowing in nature. The fineness of the powder ranges from 100 mesh to 325 mesh measured in B.S.S mesh. The typical chemical analysis of the above would be: -

SiO2
-
99.90%
Fe2O3
-
0.01%
CaO
-
0.001%
MgO
-
0.00%
LOI
-
0.04%
Al2O3
-
0.08%
 
Quartz (Silica) Powder 'B' Grade

The powder 'B' is slightly inferior to 'A' grade Quartz powder & it is mainly used by industries such as Tiles, Sanitaryware, insulator, Abrasives, Sodium Silicate and Paints. This is obtained by crushing the lumps of Quartz obtained from mines directly. The typical chemical analysis of the above would be: -

SiO2
-
99.50%
Fe2O3
-
0.03%
CaO
-
0.001%
MgO
-
0.01%
Al2O3
-
0.10%
TiO2
-
0.004%
LOI
-
0.15%
Others
-
0.15%
 
Potash Feldspar Powder:

One of the best quality Feldspar lumps available in India is in Tamilnadu State. This is also crushed in the same manner i.e. obtaining the lumps directly from the mines & crushing them in to very fine mesh. This is used in industries like ceramic Tiles, Sanitaryware, insulator, Electrodes etc. The typical chemical analysis of the above would be: -

K2O
-
11-12%
Na2O3
-
2 - 4%
SiO2
-
65 - 68%
Al2O3
-
15 - 18%
Fe2O3
-
0.12%
 
The result of analysis done by Essen & Co* on a random sample of our Quartz product is given below:
Silica
(SiO2)
-
96.62%
Alumina
( Al2O3)
-
0.12%
Ferric Oxide (Fe2O3)
-
0.05%
Soda
(Na2O)
-
0.05 %
Titania
(TiO2)
-
0.00%
Calcium Oxide
(CaO)
-
0.03%
Magnesium Oxide (MgO)
-
0.00%
Potash
(K2O)
-
0.03%
Loss On Ignition (LOI)
-
0.05%
 

*Analytical Chemicals & Assayers, Consulting Chemists & Geologists
Government of India Approved Inspection Agency
Head Office: Bangalore.Ph: (080) 522 0508.

 
Sewing Unit
Totally 3 sewing units is been set up with 140 hi-tech...
Read more...
 
Knitting Unit
Our knitting unit is a completely developed unit with...
Read more...
 
Embroidery Unit
Our embroidery unit is fully computerized, we have installed...
Read more...
 
Printing Unit
Chest Printing & table printing
Read more...
 
Mining Unit
Best quality Quartz & Feldspar Powder....
Read more...
 
Coir Pith Unit
HUC & LUC Coir pith manufacturer....
Read more...
 
Street Blues 1993-2009 All Rights Reserved